1 (edited by KERNEL 2016-09-10 21:30:51)

Topic: Search Tutorial Mis2x264 For Noob

Hi Guy,

Use Mix2x264 before encodage or next encodage ?

tutorial for noob tongue please very big thanx smile

2

Re: Search Tutorial Mis2x264 For Noob

Normal mode:
You run MediaInfo on your with x264 encoding file and it should show you the encoding setting in a format like:

cabac=1 / ref=16 / deblock=1:0:0 / analyse=0x3:0x133 / me=tesa / subme=10 / psy=0 / mixed_ref=1 / me_range=24 / chroma_me=1 / trellis=2 / 8x8dct=1 / cqm=0 / deadzone=21,11 / fast_pskip=0 / chroma_qp_offset=0 / threads=6 / lookahead_threads=1 / sliced_threads=0 / nr=0 / decimate=1 / interlaced=0 / bluray_compat=0 / constrained_intra=0 / bframes=8 / b_pyramid=2 / b_adapt=2 / b_bias=0 / direct=3 / weightb=1 / open_gop=0 / weightp=2 / keyint=250 / keyint_min=23 / scenecut=40 / intra_refresh=0 / rc_lookahead=60 / rc=2pass / mbtree=1 / bitrate=1150 / ratetol=1.0 / qcomp=0.60 / qpmin=0 / qpmax=81 / qpstep=4 / cplxblur=20.0 / qblur=0.5 / vbv_maxrate=720000 / vbv_bufsize=720000 / nal_hrd=none / ip_ratio=1.40 / aq=2:1.00

You copy those settings into mis2x264 and press 'convert', which should then give you something like:

MediaInfo - Encoding settings:
cabac=1 / ref=16 / deblock=1:0:0 / analyse=0x3:0x133 / me=tesa / subme=10 / psy=0 / mixed_ref=1 / me_range=24 / chroma_me=1 / trellis=2 / 8x8dct=1 / cqm=0 / deadzone=21,11 / fast_pskip=0 / chroma_qp_offset=0 / threads=6 / lookahead_threads=1 / sliced_threads=0 / nr=0 / decimate=1 / interlaced=0 / bluray_compat=0 / constrained_intra=0 / bframes=8 / b_pyramid=2 / b_adapt=2 / b_bias=0 / direct=3 / weightb=1 / open_gop=0 / weightp=2 / keyint=250 / keyint_min=23 / scenecut=40 / intra_refresh=0 / rc_lookahead=60 / rc=2pass / mbtree=1 / bitrate=1150 / ratetol=1.0 / qcomp=0.60 / qpmin=0 / qpmax=81 / qpstep=4 / cplxblur=20.0 / qblur=0.5 / vbv_maxrate=720000 / vbv_bufsize=720000 / nal_hrd=none / ip_ratio=1.40 / aq=2:1.00

Converted to x264 cli:
--cabac --ref 16 --deblock 0:0 --partitions all --me tesa --subme 10 --no-psy 0 --merange 24 --trellis 2 --8x8dct --cqm flat --deadzone-inter 21 --deadzone-intra 11 --no-fast-pskip --chroma-qp-offset 0 --threads 6 --lookahead-threads 1 --bframes 8 --b-pyramid normal --b-adapt 2 --b-bias 0 --direct auto --weightp 2 --keyint 250 --min-keyint 23 --scenecut 40 --rc-lookahead 60 --bitrate 1150 --ratetol 1.0 --qcomp 0.60 --qpmin 0 --qpmax 81 --qpstep 4 --cplxblur 20.0 --qblur 0.5 --vbv-maxrate 720000 --vbv-bufsize 720000 --nal-hrd none --ipratio 1.40 --aq-mode 2 --aq-strength 1.00
Warning: a modded version of x264 was used to create this file.

The following entries got ignored:
rc=2pass since rc does not hold any useful info

File mode:
you start mis2x264 with 1 as parameter

mis2x264.exe 1

press 'Set MediaInfo' and point it to a MediaInfo cli executable
then you press  'Import from file' and select the file that was encoded with x264.
mis2x264 will then analyse the file with MediaInfo and create a similar output as above.

Cu Selur

3

Re: Search Tutorial Mis2x264 For Noob

thanx Selur , I test tomorrow

go bed tongue

4

Re: Search Tutorial Mis2x264 For Noob

Selur wrote:

File mode:
you start mis2x264 with 1 as parameter

mis2x264.exe 1

press 'Set MediaInfo' and point it to a MediaInfo cli executable
then you press  'Import from file' and select the file that was encoded with x264.
mis2x264 will then analyse the file with MediaInfo and create a similar output as above.

Cu Selur

problem I do not understand sad

step by step please ,

thanx in advance smile

5

Re: Search Tutorial Mis2x264 For Noob

Which of the steps:

  • start Mis2x264 with 1 as parameter

  • press 'Set MediaInfo' and select a cli MediaInfo executable (mediainfo.exe)

  • press 'Import from file' and select the input file which was encoded with x264

do you not understand?

Cu Selur

6

Re: Search Tutorial Mis2x264 For Noob

http://i.imgur.com/YbRxOmi.png

it's good ? smile

7

Re: Search Tutorial Mis2x264 For Noob

You don't need Mis2x264 if you use Hybrid, Hybrid can do the whole thing without Mis2x264, by simply:

  • Start Hybrid

  • load the file you want to take the settings from

  • press x264->Misc->Imports/Additions->MediaInfo import->Adjust to input  (know Hybrid knows the settings)

  • load the file you want to reencode

Cu Selur

8

Re: Search Tutorial Mis2x264 For Noob

Selur wrote:

You don't need Mis2x264 if you use Hybrid, Hybrid can do the whole thing without Mis2x264, by simply:

  • Start Hybrid

  • load the file you want to take the settings from

  • press x264->Misc->Imports/Additions->MediaInfo import->Adjust to input  (know Hybrid knows the settings)

  • load the file you want to reencode

Cu Selur

operation impossible .Ts files automatic .mkv convert x264 ?

9

Re: Search Tutorial Mis2x264 For Noob

Try to write whole sentences.
I got no clue what you want to do.