126

Re: Updates,...

Hybrid rev 2014.04.04.1:

*fixed*

  • question mark accidentally replaced some of the number constants

*added*

  • avisynth: added TTempSmooth as denoiser

-> downloads: http://www.selur.de/downloads

Cu Selur

127

Re: Updates,...

Hybrid rev 2014.04.28.1:

*fixed*

  • audio: pcm extraction from avisynth input

  • audio: multi-input/batch processing audio processing

  • input: make sure tsMuxeR analysis is fed with 8.3 file names on Windows

  • cut: fix chapter&cut selection on mplayer dvd audio reencoding

  • cut: fix job optimization for ffmpeg cut calls

  • cut: keyframe positions display

  • general: crash when first a normal file and then a dvd was analysed

  • tags: remove pipe-symbol ('|') from tags which will be send to MP4Box, to avoid a crash

  • x264: 10bit encoding

  • x264: show live bitrate during crf encoding

  • xvid: y4m -> xvid encoding.
      note: progress indication is not working since mencoder doesn't provide a progress indication when fed through a pipe.

 
*changed*

  • audio: when using MultiInput (batch processing) only 'Custom' allows to change the audio queue.

  • input: check that the 'which' result(s) are indeed files and not folders

  • DivX265: adding an additional ffmpeg call to work around DivX265 not being able to show progress indication

  • preview: limit preview on mac for mpls files when mplayer is too old or not compiled with libbluray

  • preview: open the preview inside the same window Hybrid is located (horizontal alignment of monitors assumed)

  • profile: re-run auto routines if GlobalProfile or AV-Profiles get loaded and input is not empty

  • audio: use DGIndex to extract audio form DVD, if a. avisynth is present, b. input is DVD, c. mplayer reported it can't handle the input audio and d. Hybrid was set to ignore this report

  • x265: removed crf and cq from x265 defaults

*added*

  • avisynth: added support for Peachsmoother and mftoon (not much tested)

  • jobs: option to set minFreeSize to start (sub-)job

  • cut: option to always use key frames selection

-> downloads: http://www.selur.de/downloads

Cu Selur

128

Re: Updates,...

Hybrid rev 2014.06.08.1:

*added*

  • avisynth: support for aWarpSharp sharpening

  • avisynth: tivtc now also allows QTGMC 'slow' and 'Very Slow' as deinterlacer

  • avisynth: 'add custom content', allows to add content to Hybrids avisynths scripts;
      WARNING: Hybrid does not check/verify the content of the entry, so if you mess up, you are on your own!

  • Kvazaar: support for RDO quantization

  • x265: support for 4:2:2 color space

  • x265: support for '--[no-]repeat-headers'

  • x265: support for '--psy-rdo X';

  • x265: adjusted to new preset&tune values -> It's recommend to reset the x265Model
      WARNING: This option is known to produce artifacts in some cases!

 
*changed*

  • avisynth: set MTMode to 5 before LibAVVideoSource

  • avisynth: enable "Disable distributor()' for Windows 8 & 8.1, by default, for all others disable it by default

  • avisynth: fixed links which linked to avisynth.org

  • avisynth: allow distributor() even for avisynth preview

  • input: improve mpls handling

  • jobs: make sure there will be no job creation if .m4v is used as output extension while 'Audio handling' isn't set to ignore. Added awarning about it and how to avoid it and still create .m4v output.

  • DivX265: use DivX265 'resolution profiles' internally and enforce them

 

*fixed*

  • audio: mp4 audio extraction name problem (on Windows)

  • avisynth: force deinterlace + Avisynth-Deinterlacer sometimes didn't force deinterlacing

  • avisynth: RGBColorAdjust Filter-Preview

  • avisynth: ColorMatrix Avisynth/Filter-Preview

  • avisynth: bug could cause distributor() to be added, even when 'Disable distributor()' was enabled

  • avisynth: reset 'need avisynth'-checks

  • avisynth: fixed HQDering call

  • decode: mencoder 422 output and color space mixup using mencoder

  • DivX265: use constant quantizer '-qp' instead of '--cq'

  • filtering: mcdeint -> framestep didn't update the gui

  • input: monitoring folder support

  • jobs: check whether FRAPS is installed on the system or not

  • x265: 12bit encoding

  • mux: mp4box didn't always use short file names on Windows which could cause problems with unicode names&paths

  • mux: tsMuxeR set disklabel for isos


-> downloads: http://www.selur.de/downloads

Cu Selur

129

Re: Updates,...

Hybrid rev 2014.06.13.1:

*fixed*

  • audio: using audio from different source than the main input

  • audio: crash when switching between titles with and without audio

  • tools: Windows package contained a kvazaar binary which did cause problems on some systems<

*added*

  • video: initial support for QSVCEnc as encoder

  • video: initial support for FFV1 as encoder

-> downloads: http://www.selur.de/downloads

Cu Selur

130

Re: Updates,...

Hybrid rev 2014.06.13.2::

*fixed*

  • video: QSVEnc support

  • general: Vista compatibility

-> downloads: http://www.selur.de/downloads

Cu Selur

131

Re: Updates,...

Hybrid rev 2014.06.15.1:

*changed*

  • video: removed QSVEnc support on Vista since it requires Win7+ (wrote an email to the author, don't know if will react to it)

  • audio: sound playback (at end of queue/job) on Windows is now uses native Windows API calls since Vista doesn't support the QtMultimedia library if it is compiled on Windows 7

  • global: resetting models or Avisynth settings (with 'initial') will now restart (and not just close) Hybrid

*fixed*

  • video: video could get accidentally deleted before muxing if x264 1pass bitrate encoding was used.
    [*9installer: Windows: reverted Kvazaar to the official releases, since the currently packed kvazaar versions still don't work for some users

  • start: didn't start-up properly on linux&mac when placed to /usr/bin

-> downloads: http://www.selur.de/downloads

Cu Selur

132

Re: Updates,...

Hybrid rev 2014.06.17.1:

*added*

  • avisynth: de-'dot crawler': DeCrawl, Checkmate, DeCrow

*fixed*

  • decode: mencode decod ecall containing '-vf ,scale', instead of '-vf scale'

  • qsvenc: adjust to feature restriction on system

*changed*

  • avisynth: speed-up FFVideoSource by using setMTMode(5,.. instead of setMTMode(3,..

-> downloads: http://www.selur.de/downloads

Cu Selur

133

Re: Updates,...

Hybrid rev 2014.06.17.2:

*fixed*

  • audio: extracted audio didn't get deleted after audio reencoding

-> downloads: http://www.selur.de/downloads

Cu Selur

134

Re: Updates,...

Hybrid rev 2014.06.29.1:

*added*

  • video: initial support for ffvhuff and libutvideo

  • decode: added options to support hardware acceleration when ffmpeg is used.

  • mux: option to disable mkv statistics per track (introduced with mkvtoolnix 7.0.0)

*fixed*

  • preview: fixed preview issue if no avisynth is available on the system

  • video: QSVEnc support, adjusting to QSVEnc 1.23, thanks to rigaya for fixing some problems

  • ffv1: ffv1 mencoder call

  • subtitle: crash on subtitle extraction

  • timecode: fixed a crash in time code handling due to formating issues

  • audio: extracting&muxing aac to mp4 could trigger a conversion to wav, even when 'passthrough' was selected.

  • audio: enabling 'Always extract as wav' and audio handling 'passthrough' interfered

*changed*

  • general: switched to MSVC++ 2013 for Win 64bit builds

-> downloads: http://www.selur.de/downloads

Cu Selur

135

Re: Updates,...

Hybrid rev 2014.06.30.1:

*fixed*

  • general: tool tips not showing

  • video: ffvHuff-tab configuration en-/disable

-> downloads: http://www.selur.de/downloads

Cu Selur

136

Re: Updates,...

Hybrid rev 2014.07.02.1:

*added*

  • DivX265: support new VUI options

*fixed*

  • avisynth: indexing mkv(vp9) content with ffvideosource

  • ui: font change did not influence queues and separate log window

  • ui: fffmpeg progress indication

  • job: 'remove all' button not working

  • input: don't use '-demuxer mkv' when analysing mkv with a vp9 video stream

*removed*

  • tools: QSVEncC support for Windows XP (requires Windows 7 and newer)

-> downloads: http://www.selur.de/downloads

Cu Selur

137

Re: Updates,...

Hybrid rev 2014.07.03.1:

*fixed*

  • DivX265: progress indication (percentage wasn't shown)

  • ui: automatic loading of custom styling)

*changed*

  • tools: tool arrangement under Windows, to avoid problems which occurred on systems with missing run-times. Tools are now split over three locations:

    • program folder: here are all the static tools

    • 'dynamic'-sub-folder: here are all the tools which are only available as a. 32bit and b. dynamically linked

    • 'dynamicX'-sub-folder: here are all the tools which are available as 32bit and 64bit versions and dynamically linked

*NOTICE*

  • Windows: it's recommend to uninstall old Hybrid versions (settings do not have to be removed) before installing this or a newer version

-> downloads: http://www.selur.de/downloads

Cu Selur

138

Re: Updates,...

*silent update*

  • Updated the Windows installer Hybrid_2014.7.3.1_SETUP

Since it accidentally included two fhgaacenc binaries. There should be only one inside the 'dynamic' folder.

Cu Selur

139

Re: Updates,...

Hybrid rev 2014.07.10.1:

*fixed*

  • avisynth: code page problem when writing avisynth files

  • cosmetics: glitch in title progress indication

  • decode: ffmpeg crash when colorMatrix from&to are equal

  • input: time code extraction of flv files with non-ANSI names

  • input: mkv time code handling

  • input: hevc stream detection inside mkv container

  • tools: problems properly detecting tools

  • x265: bug minimizing crf min/max values that are not zero

  • audio: tsmuxer not compatible audio accidentally fed to tsMuxeR

-> downloads: http://www.selur.de/downloads

Cu Selur

140

Re: Updates,...

Hybrid rev 2014.07.14.1:

*changed*

  • avisynth: always use FFVideoSource with ', threads=1' and SetMTMode(2,..)

  • avisynth: changing MT-Threads to cpu count*2 threads, when cpu count > 1;

  • avisynth: use PreRoll instead of RequestLinear

  • cosmetics: default diff popup window restyled

  • cosmetics: added scrollbars to avisynth script view window

  • DivX265: check that output width&height need to be multiple of 8

  • subtitle: when double clicking on an subtitle entry show input file name and whether the subtitle gets embedded or not

  • x265: added support for '--ipratio', '--pbratio', '--hrd', '--aud'

*fixed*

  • audio: enforcing audio downmix to 5.1 for 6+ channels when ac3 is selected as output

  • avisynth: fixed peachsmoother missing option

  • input: crash during tsMuxeR analysis

  • output: mkv attachment passthrough problem

  • preview: problem with preview on mac

  • tools: tool detection on Windows XP; don't check for QSVEnc&fhgaacenc when on Windows XP

  • tsMuxeR: don't use 8+3 file names

-> downloads: http://www.selur.de/downloads

Cu Selur

141

Re: Updates,...

Hybrid rev 2014.07.17.1:
*fixed*

  • profile: load&saving global profiles

  • profile: resetting single model

  • tools: restart on non-windows systems

*changed*

  • cosmetics: progress indication

  • defaults: enabling 'auto save defaults' disables the default reset options

  • defaults: added question dialog before resetting something

  • input: don't use mediainfo for audio format detection for .mpls files unless specifically told to

*added*

-> downloads: http://www.selur.de/downloads

Cu Selur

142

Re: Updates,...

Hybrid rev 2014.07.27.1:

*changed*

  • avisynth: disable MT, when it's not needed

  • x265: added support for tier/profile/level and 2pass encoding, for the later you need to disable (x265->Misc->Create qp file for chapters and keep level set to 'unrestricted' otherwise it will probably crash, but the x265 developers are working on it)

*fixed*

  • avisynth: ColorMatrix-call

  • tags: tag queue accidentally got cleared partially when clicking on it

  • subs: .sup subtitle handling (conversion to .idx/.sub for mp4 muxing)

  • subs: manual subtitle extraction

  • video: 2pass custom target  file size not always properly reloaded from model/profile

-> downloads: http://www.selur.de/downloads

Cu Selur

143

Re: Updates,...

Hybrid rev 2014.08.03.1:

*changed*

  • subs: added option to enforce a specifc idx/sub resolution during .sup

  • x265: added support for '--psy-rdoq X'

  • general: added a few additional tool-tips

*fixed*

  • decode: disabling lavthreads didn't set lavthreads to 1

  • preview: crop-preview didn't show up properly when avisynth as used as decoder

  • input: more flexible parsing then reading the tsMuxeR analyse output

  • subs: subtitle language passthrough for subtitles which got extracted by tsMuxeR

-> downloads: http://www.selur.de/downloads

Cu Selur

144

Re: Updates,...

Hybrid rev 2014.08.04.1:

*removed*

  • x265: support for '--[no-]slow-firstpass (not supported by x265 atm.)

*fixed*

  • x264&x265 1pass encoding

  • ffmpeg output collection

-> downloads: http://www.selur.de/downloads

Cu Selur

145

Re: Updates,...

Hybrid rev 2014.08.06.1:

*added*

  • avisynth: added option to disable Avisynth during normal preview, this way audio and subtitles from the source can be viewed.

*changed*

  • x265: support for '--[no-]slow-firstpass'

*fixed*

  • input: ffmpeg addressing video id and temp file detection

-> downloads: http://www.selur.de/downloads

Cu Selur

146

Re: Updates,...

Hybrid rev 2014.08.25.1:

*added*

  • audio: option to not cut external audio

  • audio: don't use DGIndex when for audio extraction when chapters are selected

*removed*

  • encoder: support for cuda encoder since latest drivers dropped support for nvcuenc (which is the old api), will add a new cuda encoder when I stumble over nvcenc using command line application or I write one myself; for those who still use old nvida drivers I added a misc.ini option to enable cuda support

  • avisynth: DGDecNV got removed due to request from the author, see: http://rationalqm.us/board/viewtopic.php?f=12&t=364
    It's still supported, but the files that belong to it now have to be manually downloaded and added to the avisynthPlugins-folder for Hybrid to be able to use it.

*fixed*

  • audio: using raw external audio and mkv a/v input

  • input: wrong avs frame rate detection on decimal frame rates

  • cut: mkvmerge cut/split call

  • x265: 2pass fast 1st pass

  • x264: time codes accidentally got ignored when encoding with x264

  • decode: mencoder->ffmpeg->encoder call, removed map-call inside ffmpeg call

  • cuda: cq encoding

*changed*

  • subtitle: subtitle tab show  grab language from file name in sidebar

-> downloads: http://www.selur.de/downloads

Cu Selur

147

Re: Updates,...

Hybrid rev 2014.09.25.1:
*fixed*

  • qsvcenc: only allow '--bluray' for bitrate with lookahead

  • x265: 'Target Mode' wasn't disabled during 'average bitrate (1-pass)' selection

  • x265: removed 'frames' parameter since it could cause problems during 2pass encoding

  • x265: stats file wasn't configurable

  • x265: '1st pass' didn't show encoding dialogue

  • x265: enforce '-wpp' when vbv is used

  • x265: adjusted 'psy-rdoq' range to 0-10

  • x265: enable psy-rdoq for level 4+ (instead of 5+)

  • Xvid: entering a bitrate for unrestricted profile wasn't possible

*changed*

  • avisynth: enabled 'No Avisynth during Preview/Cropview' by default, under Config->Internals->Avisynth

  • cosmetics: added options to control the progress indication

  • general: change max resolution to 16384x16384

-> downloads: http://www.selur.de/downloads

Cu Selur

148

Re: Updates,...

Hybrid rev 2014.09.27.1:

*fixed*

  • subs: subtitle handling when 'all subtitles' was enabled

  • x264: limit --rc-lookahead to min(keyint, 250)

  • general: default paths didn't get propagated properl

-> downloads: http://www.selur.de/downloads

Cu Selur

149

Re: Updates,...

Hybrid rev 2014.10.13.1:

*fixed*

  • avisynth: make sure content is 4:2:0 before applying SalFps3

  • calc: adjusting bit rate indication when a fixed output file size was selected and the chapter selection got changed

  • cosmetics: 'extracting video ...' was shown during Xvid encoding

  • filter: don't change frame rate when doing progressive to interlaced conversion (mixed up fields and frames hmm)

  • prores: profile selection and indication

  • x264: --aq-strength wasn't properly minimized

*added*

  • filter: 'force 4:4:4 downsize' option to better preserve chroma information

  • avisynth: (direct) edgeLevel and aSharp support

*changed*

  • avisynth: rewrote avisynth filter support to easier support new filters

  • cosmetics: always show two internal decimal places for fps and progress, always round bit rate during progress indication

-> downloads: http://www.selur.de/downloads

Cu Selur

150

Re: Updates,...

Hybrid rev 2014.10.15.1:

*added*

  • input: vfr timecode extraction through ffmpeg this way Hybrid can extract the time codes of every format that is supported by libav smile (mainly useful for vfr wmv)

*fixed*

  • avisynth: DeGrainMedian-call container 2 times the 'mode'-parameter hmm

  • avisynth: Levels, only supports named parameter addressing for corning and dither

  • avisynth: DeHalo filters didn't get applied

  • avisynth: SalFPS3, 'FPS' isn't optional and needs to be set explicitly

-> downloads: http://www.selur.de/downloads

Cu Selur